Slurry Pumps

Heavy-Duty Slurry Pumps

S Series Heavy-Duty Slurry Pump

End-suction, split-case, centrifugal slurry pumps have set the world standard for heavy-duty abrasive pumping applications for decades. With large shaft diameters, heavy-duty bearing assemblies and robust slurry pumping capacity, Schurco Slurry® pumps provide a cost-effective and ideal alternative to longer lead times and the difficulty associated with working with large multinational companies.

Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly.

S Series Profile

Discharge diameters 1” to 18” (25mm to 450mm)
Heads through 240ft (73m)
Flow rates through 22,000gpm (5,000m3/h)
Casing pressure tolerance to 300psig (2,020kPa)

L Series Lined Slurry Pump

Similar in design to the Schurco® S Series (Warman® AH®), the L Series has the same rugged design features with higher efficiencies. It is offered fully lined with split outer casings.

Schurco Slurry® L Series pumps maintain the ruggedness and slurry handling capacity of the S Series, but with a wider range of flow rates and lower lifecycle costs. Higher efficiency impellers make the L Series a valuable feature in any plant.

L Series Profile

Discharge diameters 3” to 22” (75mm to 550mm)
Heads through 180ft (55m)
Flow rates through 30,000gpm (6,800m3/h)
Casing pressure tolerance to 250psig (1,725kPa)

U Series Unlined Slurry Pump

The U Series has the same hydraulic performance profiles of their lined counterparts in the S and L Series, and can be applied on existing lined slurry pump installations using a conversion kit.

U Series Profile

Discharge diameters 2” to 10” (50mm to 250mm)
Heads through 240ft (73m)
Flow rates through 6,000gpm (1,350m3/h)
Casing pressure tolerance 300psig (2,020kPa)

Special Duty Slurry Pumps

H Series High-Head
Slurry Pump

Schurco Slurry® H Series pumps are fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps.

The high heads along with sturdier wear parts make these pumps some of the most rugged in the Schurco Slurry® line. Extensive exterior ribbing allows for higher heads to be reached with a single pump, and bulked up wet end parts handle the toughest applications in the field today.

H Series Profile

Discharge diameters 1” to 4” (25 mm to 100 mm)
Heads through 325 ft (100 m)
Flow rates through 3,000 gpm (700 m3/h)
Casing pressure tolerance 750 psig (5,170 kPa)

Z Series Gravel/Dredge Pump

Schurco Slurry® Z Series pumps are designed to handle very large particles for gravel and dredging operations.

The Schurco® range of dredge and gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Its capability of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities, further increasing component life.

Z Series Profile

Discharge diameters 4” to 14” (100 mm to 350 mm)
Heads through 230 ft (70 m)
Flow rates through 12,000 gpm (2,700 m3/h)
Casing pressure tolerance 300 psig (2,020 kPa)

Other Slurry Pumps

V Series Vertical Slurry Pump

Schurco Slurry V Series vertical slurry pumps are ideal for a variety of submerged suction pumping applications.

These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, the V Series does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.

Vertical pumps from Schurco not only provide excellent wear life properties, they also operate efficiently to further reduce operating costs. These vertical slurry pumps can be fully elastomer lined or hard metal fitted. There are no submerged bearings or packing with a unique high capacity double suction design. Optional recessed impeller and suction agitator are available. The innovative product design and widely configurable range help our customers reduce costs.

P Series Chrome-Iron
Dewatering Pump

Schurco P Series are designed to provide exceptional performance in high head mine dewatering as well as general dewatering applications.

Single pumps can achieve heads over 50% higher than standard slurry pumps. These dewatering pumps are ideal for dirty water and light slurry (slurry specific gravities of roughly 1.05), and provide the end user with the ultimate in reliability.

P Series Profile

Discharge diameters 4” to 6” (100mm to 150mm)
Heads through 420ft (128m)
Flow rates through 2,250 gpm (510 m3/h)
Casing pressure tolerance 300psig (2,020kPa)