H Series High-Head Slurry Pump

Schurco Slurry® H Series pumps are fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps.

The high heads along with sturdier wear parts makes these pumps some of the most rugged in the Schurco Slurry® line. Extensive exterior ribbing allows for higher heads to be reached with a single pump, and bulked up wet end parts handle the toughest applications in the field today.

H Series Profile

Discharge diameters 1” to 4” (25 mm to 100 mm)

Heads through 325 ft (100 m)

Flow rates through 3,000 gpm (700 m3/h)

Casing pressure tolerance 750 psig (5,170 kPa)

H Series Features

Wetted Parts

Impellers – wide variety of metallurgic options – pump out vanes on rear and front (on closed impellers) reduce recirculation within pump, and aid in preventing seal contamination – optional castings of straight or semi-Francis vanes (from 3 to 8 vanes on certain sizes) offer wider hydraulic options in single sizes

Liners – heavy-duty high chrome liner – active engineered attachment mechanism to casing via threaded bolts as opposed to unreliable glue


Expeller (Centrifugal Seal) – no external sealing water required where applicable
Stuffing Box – flushed gland sealing with braided packing and a lantern ring
Mechanical Seals

Bearing Assembly

Cartridge-style bearing housing allows for removal from pump and assembly in controlled environment

Oversized shaft diameters and reduced overhang in the wet-end contribute to long life and reliability in the field</p

Interchangeable with Warman® HH® series pumps.


Selected Applications
  • pipeline transport
  • high velocity hydraulic transport
  • mineral processing
  • coal prep
  • cyclone feeds
  • aggregate processing
  • fine primary mill grinding
  • chemical slurry service
  • tailings, secondary grinding
  • industrial processing
  • pulp and paper
  • food processing
  • cracking operations
  • ash handling